2dvr.com offers a free demonstration of the DVRNS service for your evaluation. Enter the free demonstration site using the remote administration system software supplied with your DVR. Follow the instructions to set up the IRAS software on your personal computer using the information for the DVR Name Service Server site as listed below:

Site Name:	2dvrdemo
Use DVRNS:	(Check this box)
DVR Name:	2dvrdemo
User ID:	2dvrdemo
Password:	12345678
Confirm Password:	12345678

1. After the IRAS program has been installed, the "IRAS Server" icon is placed on the computer desktop.
   
2. Double click the IRAS Server icon to start the program. The following screen will open.
   
3. After the program loads click on the Local Setup button located in the upper left or right corner of the screen.
   
4. Leave all fields in the default setting. At the bottom of the page in the DVRNS Server block, enter 2dvr.com in the IP address field. Leave the default port number as 10088 in the Port field. Then select the Remote Site tab.
   
5. After entering the Remote Site tab and then click on the Add button.
   
6. The Add Site window will open.
   
7. Enter 2dvrdemo in the Site Name field.
8. Place a check in the Use DVRNS field
9. Enter 2dvrdemo for the DVR Name.
10. Enter 2dvrdemo for the User ID.
11. Enter 12345678 for the "Password" and again as "Confirm Password".
12. Click on OK on the "Add Site" page and then OK on the "Setup - Admin" page.
13. The RAS main screen will be displayed. Locate the plus sign beside REMOTE. Click on the plus sign to open all available sites. The site just created should be visible.
    
14. Click on the site and then on the Watch icon.
    
15. The DVR will be connected and live video from the 2dvr.com demo site should be displayed.